IG1 Apache OMB Type LPG / CNG Rail Injectors HD 4 Cylinders 3 Ohms DC12V

IG1 Apache OMB Type LPG / CNG Rail Injectors HD 4 Cylinders 3 Ohms DC12V

The IG1 Apache OMB Type HD 4 Cylinders 3 Ohms LPG / CNG Rail Injector is a part of the natural gas engine intake system. It consists of a set of air nozzles, temperature and pressure sensors, spray rails, and air outlets. Its function is: according to the control strategy of the ECU under different operating conditions of the engine [ The injection timing and pulse width (jet volume) calculated by the ECU are used to quantitatively inject the compressed natural gas into the air rail or cylinder.

First, determine the conditions for the scrapping of the spray rail coil:
(1) Whether the wire harness root is leaking.
(2) Check if the resistance of the four coils is between 3.9 and 4.3 ohms.

Second, when oil or mud and other impurities are injected into the spray rail, abnormal phenomena such as burning idling instability and acceleration of the car may occur, especially when the natural gas/liquefied gas contains too much impurities such as oil and water. If the spray rails at this time have not been scrapped, routine maintenance and quick repair and maintenance can be carried out according to the following conditions.

Technical parameter of IG1 Apache OMB Type LPG / CNG Rail Injectors 4 Cylinders 3 Ohms:

Main dimension of IG1 Apache OMB Type 4 Cylinders 3 Ohms LPG / CNG Rail Injectors:

Detail enlargement of IG1 APACHE OMB Type LPG / CNG Injector Rail 4 Cylinders 3 Ohms:

Replacement kit of IG1 APACHE OMB Type 4 Cylinders 3 Ohms LPG / CNG Injector Rail:

More details about OMB Type IG1 Apache 4Cylinders 3ohms LPG / CNG Injector Rail in below Youtube Video:

Basic Introduction of IG1 Apache OMB Type LPG / CNG Rail Injectors:

Working principle of cng/lpg injector rail: gas is stored in the spray rail. Generally, 3 or 4 nozzles are installed in the spray rail to adapt to different models, and a pressure sensor is also installed to monitor the pressure in the spray rail. Precision control of the opening and closing of the nozzle, the gas is delivered to the cylinder through the high pressure nozzle.

Is there a reaction to the problem of natural gas spray rail?
1. When the air pressure is not enough, it may be impossible to speed up or the vehicle may be promoted.
2. When the air pressure is unstable, it will be slow to respond.
3. If the air pressure is too high, it will cause the engine to shake. If the combustion is not complete, the fuel economy will be deteriorated and the environment will be polluted.

How to choose the fuel rail diameter?
According to years of experience, 1.0 displacement caliber 1.6. 1.3 and 1.4 displacement caliber 1.7. 1.5 and 1.6 displacement caliber 1.8. 1.8 displacement caliber 2.0. 2.0 displacement caliber 2.2. 2.2 displacement caliber 2.4. Pay attention to the diameter of the spray rail (the size of the center of the air nozzle thread) when purchasing. The size of the bore is directly related to the formation of the engine mix ratio, so be sure to choose the right one.

Welcome to your any question and inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years.   * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on