
LPT slip rings are through-hole slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). Using advanced fiber brush, reliable contact is guaranteed with very low friction. The center hole can be selected from 0 to 1000mm, the current can be selected from mA to 5000 amps, and the voltage can be up to 10000 volts, which can fully meet your different transmission schemes.
Electrical slip ring Specification
Circuits | 6 |
Current Rating | 10A |
Voltage | 240 V AC/DC |
Dielectric Strength | ≥1000V@50Hz between circuits |
Insulation | ≥500MΩ@500VDC |
Hole Diameter | 12.7mm |
Working Speed | 0~300 RPM |
Contact | Precious metal |
Housing | Aluminum alloy |
Wire Length | Stator:300mm; Rotor:300mm |
Working Temperature | -20~+60℃ |
Humidity | ≤60%RH |
Protection Grade | IP54 |
Outline Drawing
Electrical slip ring Product Display
JINPAT Electronics Co., Ltd
JINPAT Electronics, founded in 1996, is a national high-tech enterprise specializing in R&D, manufacturing and sales of high-precision slip rings. Typical products like Capsule Slip Ring, Through-bore Slip Ring, Large-current Slip Ring, Coax Rotary joint, Fiber Optic Slip Ring, Separate Slip Ring, Pin Slip Ring.
Besides, customization is supported to cater to the different application in that slip ring can be designed exclusively integrated with Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple, RS232, RS422 and so forth.