
Gigabit Ethernet Slip Ring with Many Circuits and Aluminum Alloy Housing
Description
Ethernet slip ring is an electric rotary joint aiming at the transmission of Ethernet signal. The LPC-36A-1702-05S-E3 is an electrical part that transmits electricity, Ethernet and other signals. Working in a temperature of -40~+60℃, it also has a protection level of IP54. For any request, technical support can be offered to achieve a custom solution.
Specification
Circuits | 1circuit *Gigabit Ethernet, 5circuits *Signal, 17circuits *2A |
Working Voltage | 240V |
Dielectric Strength | Between circuits≥500VAC@50Hz |
Insulation | 100MΩ@500VDC |
Electrical Noise | ≤20mΩ |
Working Speed | 0~300 rpm |
Contact | Precious Metal |
Housing | Aluminum Alloy |
Wire Size | φ6.5-AWG28#Silver Plated |
Wire Length | Rotor:800±5mm Stator:800±5mm |
Temperature | -40°C~+60°C |
Humidity | ≤60%RH |
IP | IP54 |
JINPAT Electronics Co., Ltd
JINPAT Electronics, founded in 1996, is a national high-tech enterprise specializing in R&D, manufacturing and sales of high-precision slip rings. Typical products like Capsule Slip Ring, Through-bore Slip Ring, Large-current Slip Ring, Coax Rotary joint, Fiber Optic Slip Ring, Separate Slip Ring, Pin Slip Ring.
Besides, customization is supported to cater to the different application in that slip ring can be designed exclusively integrated with Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple, RS232, RS422 and so forth.