KMH-408L Stainless Steel Constant Temperature And Humidity Chamber

Reliable Testing And Stainless Steel Humidity Testing Chamber With Standards Test​

1. Application

An environmental room, also known as a climate chamber or a climate chamber, is a shell for testing the effects of specific environmental conditions on biological products, industrial products, materials and electronic equipment and components.
Such a room can be used:
As an independent test of the environmental impact of the specimen;
As a further physical test or chemical test sample preparation;
As the environmental conditions for sample testing;

2. Standard configuration

● Stainless steel appearance
● With special electronic expansion valve system of energy-saving refrigeration
● Professional humidity generation and control
● Unique thermal fracture structure for extreme testing
● Window * 1, cable port (port Φ50mm) * 1, shelf * 2, indoor light * 1, power cord * 2m
● No fuse circuit breaker, overvoltage, overheat and overvoltage protection, overvoltage protection, fan overload protection, dry heat protection


3. Features

a. High-quality appearance, the body with curved, the surface of automotive painting technology processing, mechanical explosion-proof handle, easy to operate, safe and reliable.
B. Rectangular Multilayer View window, use guinea pig observation in the test window with anti-sweat heater device to prevent water vapor condensation, knot, water droplets, LED lights to keep the internal lighting.
C. Door frame with airtight packaging, can effectively isolate the internal temperature of the leak
D. Equipped with external water supply system to facilitate the supply of cylinder water supply, and automatic recycling use.
E. Compressor recycling system using the French "Tecumseh" brand, which can effectively remove the condenser pipe and capillary lubricants with a full range of environmentally friendly refrigerant (R23, R404, R507)
F. The controller uses the imported LCD display to display the measured value (PV) and the set value (SV) time
G. With multi-segment program editor and temperature and humidity controller can be fast (fast) or slope (SLOP) control.
H. The built-in moving wheel allows easy movement and placement, with a strong positioning screw position.

4. Optional accessories

● Cable port: Φ100mm cable port available
● Shelf
● Ro-type water purifier: R-80 / day
Provide moisturizing humidifier and wet bulb wick without dirt.
● Internal glass door with operating port
You can set the glass door after the main door so that you can observe the specimen. Two operating ports with a diameter of 130 mm are used to handle the sample indoors without opening the glass door.
● Dehumidifier
Rotary regenerative dehumidifier M-120 can accurately control the low humidity (5 ℃ 5% RH), the electrostatic reliability test.
● Temperature and humidity recorder
Temperature 1 pen and 1 degree of humidity.
Temperature 3 points and humidity 1 point.
Temperature 6 points and humidity 6 points.
● Defrost circuit
When working below 0 ° C, the chamber will automatically detect and melt the frost on the evaporator.
● Liquid or infection
In order to rapidly lower the temperature in the chamber, the liquid cylinders in the chamber can be connected

5. Specifications

6. A part of product series for ref.

7. Package

8. KOMEG Culture

ABOUT KOMEG
 

Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.

KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.

KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)

KOMEG also has branch office in Shenzhen.

Our Philosophy
Born for quality, test for future.

Our Aim

Better idea, better design and better quality.

KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.

Our strong R&D team and skilled engineers and workers are the key factors for our success.

No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.

Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.

Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO, Midea, TCL and Huawei are also among our long-term clients. With KOMEG top brand strength, renowned reputation domestic and overseas, our products are widely exported to Europe, America, Southeast Asia,  Africa, Oceania, etc. countries like Russia, Germany, Korea, Singapore, Brazil, etc.


Distributors welcomed, Inquire today to get your order started.