
KEY WORDS:
Flap Barrier, half height turnstile, waist height turnstile, falp turnstile, turnstile, turnstiles, access control turnstile, access control barrier, sensor gate, sensor barrier, panel barrier, wing barrier, wing gate, wing turnstile, speed gate, access control system, perimeter protection barrier.
PRODUCT CLASSIFICATIONS:
-> Single-core mechanism: RNCF1088
The flap barrier only equipped with single-core in the cabinet, usually be used in single lane or multi-lane applications.
->Dual-core mechanism: RNCF1088S
The flap barrier equipped with independent dual-core in the
cabinet, usually be used in multi-lane applications.
PRODUCT DESCRIPTIONS:
The retractable flap turnstile controls pedestrian access between
public and secure areas. The turnstile lane uses an array of
optical sensors to determine the number and direction of persons
passing through the lane. The turnstile uses a retractable flap to
block the pedestrian’s path.
The flap turnstile system is provided with a standard electric
interface and can easily integrates the common 3rd party equipment
with read/write facilities, such as access control system, bar-code
scanner, Token /ID/IC card reader, time & attendance system,
coin collector, card collector, biometric systems (fingerprint
& face recognition), consumption system, ESD system and fare
collection system, etc.
Housing dimension: | 1500mm*300mm*990mm |
Flap arm length: | 250mm |
Max arm width: | 580MM |
Housing material: | Stainless steel 304 |
Power supply/frequency: | AC220V±10%, 50Hz |
Drive motor: | brush motor |
Flow speed: | 30/minute |
Input interface: | +5V electric level signal or >100ms impulse signal, drive current >10mA, dry contact (COM NO). |
Opening and closing time: | 0.5S |
Power on and reset time: | 3s |
Relative humidity: | ≤90% |
Working environment: | Inner and outer (with shelter) -25ºC~+50ººC |
STANDARD FEATURES & FUNCTIONS:
(1). The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader, consumption system, ESD system and access control system etc.
(2). Automatic check fault and alarm prompt function: to convenient for users to maintain and use.
(3). The running status of device can be set up through pressing the built-in small keyboard of the main control board.
(4). Infrared detection sensors: The device uses several infrared sensors transmitter and receiver type. The sensors are positioned at two different heights to defend against people trying to roll/crawl through the lane without being detected. The sensors are positioned at approximately knee height and waist height. The sensors can detect abnormal access and turnstile system will stay locked.
(5). Anti-pinch function: Auto-alarm will activate for unauthorized pedestrian movement and tailgating. The barrier uses several photo sensors to prevent turnstile closure on a person while inside the lane.
(6). Emergency-escape function: When power off, it will be opened the gates automatically to meet the request of fire protection. Also the gates will open by pressing the emergency button which can be remote-controlled whether the power is on or not. (Optional).
(7). Remote control and management function: Through the management computer to realize remote control and management.
(8). Streamline design that utilizes shared cabinets for multi-lane applications.
(9). The entire system runs smoothly, with a small noise and free of mechanical impact.
(10). With normally open & normally closed working mode.
(11). Approved CE certificate.
APPLICATIONS:
Typical areas of application are: Employee and Visitor Access
Control, Time & Attendance Integration, Loss Prevention,
Government Facilities, Corporate Lobbies, Buildings, Banks, Hotel,
Super market, Park, Building Sites, Museums, Retail outlets,
Railway Terminals and Airports etc.
PROJECTS:
WORKSHOP:
Shenzhen Rona Intelligent Technology Co., Ltd
Established in 2004, Shenzhen RONA Intelligent Technology Co., Ltd (hereinafter referred as to RONA) is a leading Chinese manufacturer of security turnstiles and intelligentized access control system.
With more than 15 years professional production facilities and advanced engineering innovations, RONA designs, manufactures and successfully markets products that meet international standards of the security industry. Products by RONA work at many hundreds of locations in 60 countries worldwide.
we have manufactured a full-line of security turnstiles at our ISO 9001:2008 certified facility in Shenzhen China. Our customers are stadiums, health clubs, factories, schools, governments, embassies, office buildings, amusement parks, arenas and any other site that requires the control of pedestrian access.
RONA started and continues as a professional turnstile company with one goal – to deliver a broad range of innovation, high-quality products and services that meet our customers needs for security and effective business management.
-> Luxury Speed Gate
-> Tripod Turnstile
-> Swing Gate Turnstile
-> Flap Turnstile
-> Sliding Gate Turnstile
-> Drop Arm Turnstile
-> Non-obstacle Optical Turnstile
-> Waist Height Turnstile
-> Full Height Turnstile
-> Access Control System
-> Ticket Management System
-> Visitor Management System
-> 15 years expertise in the security turnstile market
-> Sales in 60 countries worldwide
-> Over 7000 sq. m of production & office space
-> An over 100-strong team of qualified professionals
-> A sales network of over 7 cities in China
-> Client Services, Technical Support, Marketing and Advertising, Research and Development Departments located in Shenzhen, China
-> A modern manufacturing plant in China
-> Finished-goods warehouses in Shenzhen
-> RONA quality management system is compliant with the CE &ISO 9001 international standard
RONA Industrial Park